Notice: Undefined index: logueado in /disk1/yoreparo.com/config/config.produccion.php on line 250 Hp color laser jet 2600n - Impresoras y Scanners - YoReparo
Registrarse Gratis

¡Únase para Aprender y Compartir!

Hp color laser jet 2600n

02/8/2010 10:02AM
Hola buen dia.
Tengo un problema con una impresora hp color laser jet 2600n, necesito resetaera esta impresora, e estado buscando en la red pero no encuentro la forma de hacerlo, me podrian ayudar?
Saludos, gracias.
¿Sabes la respuesta?Responder
02/8/2010 09:22PM
amigo, que entiende usted por resetear? o que debemos entender nosotros por resetear.? no es groseria, lo que pasa es que es muy raro hacerle una actualizacion de firmware a una impresora ( si es a lo que se refiere) si nos dice que fallo presenta podriamos tal vez encontrar una solucion a su problema, saludos.
comentario
03/8/2010 02:27PM
buenas te envios los 2 reset que acepta la maquina, sino sabes la traduccion utiliza el traductor de google, espero que te ayude.


Service mode functions (SERVICE ONLY)
Cold reset
Cold-reset, which power-cycles the engine with a special button press, is not supported for this
printer. Instead, use the feature “Restore defaults” located in the Service menu to reset default
settings. For more information, see Service menu.
NVRAM initializer
CAUTION NVRAM initialization will erase all network settings. Before performing

NVRAM
initialization, print a Configuration page, which contains network setting information.
NVRAM init will perform the following functions:
■ Resets all customer-accessible menu settings via control panel and software back to the factory
default settings
■ Resets the language to the value set at the factory
■ Resets the default media size to cold reset media size
■ Resets the symbol set to PC-8
Use the following procedure to execute an NVRAM-init.
1 Turn off the printer.
2 Press and hold the (SELECT) and (CANCEL JOB) buttons simultaneously.
3 Turn on the printer.
4 When you see the message Permanent storage init displays, release the (SELECT) and
(CANCEL JOB) buttons.
When the NVRAM init is complete, the printer will return to the Ready state.

Super NVRAM initializer
CAUTION Super NVRAM initialization will erase all network settings. Before performing
Super NVRAM initialization, print a Configuration page, which contains network setting
information.
When a super NVRAM init is performed, the printer enters the Generic Product Mode, which
changes the language and country/region settings to “undefined.”
NOTE Super NVRAM init will erase all data stored in the protected NVRAM settings.
Use the following procedure to execute a super NVRAM init.
1 Turn off the printer.
2 Press and hold the (LEFT ARROW) and (RIGHT ARROW) buttons simultaneously