Registrarse Gratis

¡Únase para Aprender y Compartir!

[Solucionado] codigos de error de laser monocromáticas y color OKI

29/5/2009 08:12PM
Les comparto estos códigos de error que encontré en la web:
http//c5450.okionline.co.uk/index.asp?printername=C5450&menumode=0&content=errorcodes.
aunque dice que es para la C5450, también sirve para la B4350, específicamente me ha servido resolver error de termistor (error 171) y el error de memoria (0331).
saludos.

Printer Error Codes
If the error code you're looking for is not in the table below then send an email to support@okionline.co.uk and we will find out what it means.
Error Code Description Recovery

001 Machine Check Exception
A serious problem has been detected on the CU board Seek attention of service person if restarting the printer does not correct the problem

002 DSI Exception
When the program has attempted to look up an invalid address Note the 24-digit addresses (usually 3), then restart the printer. Check reproducibility if possible. Repeat the same operation after restarting the printer and check if the same service call message appears

003 ISI Exception
When the program has attempted to look up an invalid address Note the 24-digit addresses (usually 3), then restart the printer. Check reproducibility if possible. Repeat the same operation after restarting the printer and check if the same service call message appears

004 Alignment Exception
When the program has attempted to look up an invalid address Note the 24-digit addresses (usually 3), then restart the printer. Check reproducibility if possible. Repeat the same operation after restarting the printer and check if the same service call message appears

005 Program Exception
The program has attempted to look up an invalid address Note the 24-digit addresses (usually 3), then restart the printer. Check reproducibility if possible. Repeat the same operation after restarting the printer and check if the same service call message appears

006 Floating-point Unavailable Exception
The program has attempted to look up an invalid address Note the 24-digit addresses (usually 3), then restart the printer. Check reproducibility if possible. Repeat the same operation after restarting the printer and check if the same service call message appears

007 Instruction Address Breakpoint Exception
The program has attempted to look up an invalid address Note the 24-digit addresses (usually 3), then restart the printer. Check reproducibility if possible. Repeat the same operation after restarting the printer and check if the same service call message appears

030 CU Slot1 DIMM RAM Check Error
An error has been detected in operation checks on the RAM in slot 1 (or resident RAM on models that have a resident RAM). Note the 24-digit addresses (usually 3), then restart the printer. Check reproducibility if possible. Repeat the same operation after restarting the printer and check if the same service call message appears

030 CU Slot1 DIMM RAM Check Error
An error has been detected in operation checks on the RAM in slot 1 (or resident RAM on models that have a resident RAM). Note the 24-digit addresses (usually 3), then restart the printer. Check reproducibility if possible. Repeat the same operation after restarting the printer and check if the same service call message appears

031 CU Slot3 DIMM RAM Check Error
An error has been detected in operation checks on the RAM in slot 1 (or resident RAM on models that have a resident RAM). Note the 24-digit addresses (usually 3), then restart the printer. Check reproducibility if possible. Repeat the same operation after restarting the printer and check if the same service call message appears

032 CU Slot3 DIMM RAM Check Error
An error has been detected in operation checks on the RAM in slot 1 (or resident RAM on models that have a resident RAM). Note the 24-digit addresses (usually 3), then restart the printer. Check reproducibility if possible. Repeat the same operation after restarting the printer and check if the same service call message appears

034 RAM Configuration Error
RAMs have been mounted in the wrong order Check the specification and install the RAMs in correct order

035 Slot1 RAM Spec Error
When the RAM mounted in slot 1 does not meet the specification Check the specification and install RAMs supported by the product

036 Slot2 RAM Spec Error
When the RAM mounted in slot 2 does not meet the specification Check the specification and install RAMs supported by the product

035 Slot3 RAM Spec Error
When the RAM mounted in slot 3 does not meet the specification Check the specification and install RAMs supported by the product

040 CU EEPROM Error
An error has been detected in operation checks on the EEPROM mounted on the CU board. The device needs to be replaced if restarting the printer does not correct the problem

041 CU Flash Error
When an error has been detected in operation checks on the flash memory mounted on the CU board. The device needs to be replaced if restarting the printer does not correct the problem

050 Operator Panel Error
When an error has been detected in the LC+D11D driver for the op panel. The device needs to be replaced if restarting the printer does not correct the problem

051 CU Fan Error
The CU cooling fan had stopped or is malfunctioning The device needs to be replaced if restarting the printer does not correct the problem

070 PS Can't Happen Failure
When an error has been detected in the PostScript core If an address is displayed on LCD, note it down. Restart the printer

090 Finisher stapler error
Seek attention of service person if restarting the printer does not correct the problem

091 Finisher tray elevator motor error
Seek attention of service person if restarting the printer does not correct the problem

092 Finisher bin 2 exit belt motor error
Seek attention of service person if restarting the printer does not correct the problem

093 Finisher jogging motor error
Seek attention of service person if restarting the printer does not correct the problem

094 Finisher main feed motor error
Seek attention of service person if restarting the printer does not correct the problem

102 Engine RAM Error
When an error has been detected while reading/writing the RAM at power-up Seek attention of service person if restarting the printer does not correct the problem

103 Engine SRAM Error
When an error has been detected while reading/writing the static RAM at power-up Seek attention of service person if restarting the printer does not correct the problem

104 Engine EEPROM Error
When an error has been detected while reading/writing the EEPROM at power-up Seek attention of service person if restarting the printer does not correct the problem

105 Engine EEPROM Missing Error
When the EEPROM is not detected at power-up Seek attention of service person if restarting the printer does not correct the problem

106 Engine Control Error
When an error has been detected in the engine control logic Seek attention of service person if restarting the printer does not correct the problem

111 Illegal Duplex Unit
When a duplex unit for a different model has been detected

112 Illegal Tray2 Unit
When Tray 2 for a different model has been detected

113 Illegal Tray3 Unit
When Tray 3 for a different model has been detected

114 Illegal Tray4 Unit
When Tray 4 for a different model has been detected

115 Illegal Tray5 Unit
When Tray 5 for a different model has been detected

116 Illegal Finisher Unit
When a finisher unit for a different model has been detected

120 PU Board Fan Motor Error
When an error has been detected in the PU board cooling fan Seek attention of service person if restarting the printer does not correct the problem

121 Power Supply LSI Error
When a communication error with high-voltage LSI chip has been detected Seek attention of service person if restarting the printer does not correct the problem

122 Power Supply Fan Motor Error
When low-voltage PSU thermal error or a malfunction of fuser ventilation fan (PX713 only)/PSU cooling fan has been detected Seek attention of service person if restarting the printer does not correct the problem

123 Humidity Sensor
When the sensor has detected abnormal ambient humidity, or when the humidity sensor has not been connected Seek attention of service person if restarting the printer does not correct the problem

124 Temperature Sensor
When the sensor has detected abnormal ambient temperature Seek attention of service person if restarting the printer does not correct the problem

125 Multi-purpose Tray Home Error
When an error has been detected in front feeder homing Seek attention of service person if restarting the printer does not correct the problem

126 Sensor Dewed Error
When a condensation error has been detected Wait for a while, then restart the printer.

127 Fuser Unit Fan Error
When an error has been detected in the fuser cooling fan Seek attention of service person if restarting the printer does not correct the problem

130 LED Head Over Temperature
When an overheated LED head has been detected Seek attention of service person if restarting the printer does not correct the problem

131 LED Head Missing, Color:Yellow
When yellow LED head connection cannot be detected Seek attention of service person if restarting the printer does not correct the problem

132 LED Head Missing, Color:Magenta
When magenta LED head connection cannot be detected Seek attention of service person if restarting the printer does not correct the problem

133 LED Head Missing, Color:Cyan
When cyan LED head connection cannot be detected Seek attention of service person if restarting the printer does not correct the problem

134 LED Head Missing, Color:Black
When black LED head connection cannot be detected Seek attention of service person if restarting the printer does not correct the problem

140 Drum Up/Down, Color:Yellow
When the yellow drum has been detected in an abnormal position Seek attention of service person if restarting the printer does not correct the problem

141 Drum Up/Down, Color:Magenta
When the magenta drum has been detected in an abnormal position Seek attention of service person if restarting the printer does not correct the problem

142 Drum Up/Down, Color:Cyan
When the cyan drum has been detected in an abnormal position Seek attention of service person if restarting the printer does not correct the problem

150 Drum Fuse cut NG, Color:Yellow
When yellow drum fuse-cut error has been detected at power-up Seek attention of service person if restarting the printer does not correct the problem

151 Drum Fuse cut NG, Color:Magenta
When magenta drum fuse-cut error has been detected at power-up Seek attention of service person if restarting the printer does not correct the problem

152 Drum Fuse cut NG, Color:Cyan
When cyan drum fuse-cut error has been detected at power-up Seek attention of service person if restarting the printer does not correct the problem

153 Drum Fuse cut NG, Color:Black
When black drum fuse-cut error has been detected at power-up Seek attention of service person if restarting the printer does not correct the problem

154 Belt unit Fuse cut NG

When belt unit fuse-cut error has been detected at power-up Seek attention of service person if restarting the printer does not correct the problem

155 Fuser unit Fuse cut NG
When fuser unit fuse-cut error has been detected at power-up Seek attention of service person if restarting the printer does not correct the problem

160 Toner Sensor Error, Color:Yellow
When yellow toner sensor error has occurred (in factory mode only) Check toner lock lever is in position - Seek attention of service person if restarting the printer does not correct the problem

161 Toner Sensor Error, Color:Magenta
When magenta toner sensor error has occurred (in factory mode only) Check toner lock lever is in position - Seek attention of service person if restarting the printer does not correct the problem

162 Toner Sensor Error, Color:Cyan
When cyan toner sensor error has occurred (in factory mode only) Check toner lock lever is in position - Seek attention of service person if restarting the printer does not correct the problem

163 Toner Sensor Error, Color:Black
When black toner sensor error has occurred (in factory mode only) Check toner lock lever is in position - Seek attention of service person if restarting the printer does not correct the problem

171 Upper Thermistor, State:Open
When an open circuit has been detected in the heat roller thermistor (low temperature)

540 Toner Sensor Error, Color:Yellow
When Yellow toner sensor error has occurred Check toner lock lever is in position - Seek attention of service person if restarting the printer does not correct the problem. See our How to Guide

541 Toner Sensor Error, Color:Magenta
When Magenta toner sensor error has occurred Check toner lock lever is in position - Seek attention of service person if restarting the printer does not correct the problem. See our How to Guide

542 Toner Sensor Error, Color:Cyan
When Cyan toner sensor error has occurred Check toner lock lever is in position - Seek attention of service person if restarting the printer does not correct the problem. See our How to Guide

543 Toner Sensor Error, Color:Black
When Black toner sensor error has occurred Check toner lock lever is in position - Seek attention of service person if restarting the printer does not correct the problem. See our How to Guide
Esta pregunta está cerrada. Si quieres puedes: Abrir otra Pregunta
30/5/2009 11:18AM
cordial saludo
esta bueno su aporte,en su momento nos ha de servir para quienes como yo estamos comenzando en este arte,todo lo que aporten al foro nos ha de servir,muchas gracias.
SOLUCIÓN